Most Cited Articles

Open access

ISSN: 2468-6050

Heat-transfer characteristics of screw tube in one-side high heat load condition for fusion reactor divertor application

Share article

Best estimate plus uncertainty analysis of the China advanced large-scale PWR during LBLOCA scenarios

Share article

Investigation of kaolin - Granite composite bricks for gamma radiation shielding

Share article

Analysis of hemispherical vessel ablation failure involving natural convection by MPS method with corrective matrix

Share article

Preliminary research on the irradiation-thermal-mechanical coupling behavior simulation method of FCM fuel

Share article

Experimental and numerical investigation of two phase ejector performance with the water injected into the induced flow

Share article

Optimization of the TRISO fuel particle distribution based on octahedral and icosahedral-based segmentation methods in the pebble-bed nuclear core

Share article

Experimental study on flow characteristics of rectangular narrow channel

Share article

Analysis on containment thermal hydraulic behaviour under passive containment heat removal system operation condition for HPR1000

Share article

Calculation of flow heat transfer characteristics of liquid gallium

Share article

Studies on post-dryout heat transfer in R-134a vertical flow

Share article

Steady-state thermal fluids analysis for the HTR-PM equilibrium core

Share article

Electrochemical behavior and corrosion rate prediction study of alloy 690

Share article

Assessment of radiological safety and emergency response of VVER-1200 type reactor

Share article

Development of a three-dimensional method for thermal-hydraulics/neutronics coupling analysis and its application on CFETR helium-cooled solid breeder blanket

Share article

Numerical investigation of the thermal-hydraulic characteristics of AP1000 steam generator U-tubes

Share article

Influence of zinc injection on deposition of corrosion products on inner wall of heat transfer tube

Share article

Preliminary experimental validation of multi-loop natural circulation model based on RELAP5/SCDAPSIM/MOD 4.0

Share article

Effect of LaB<inf>6</inf> addition on mechanical properties and irradiation resistance of 316L stainless steels processed by selective laser melting

Share article

Study on startup characteristics of prototype once-through steam generator for China fast reactor

Share article

Tomographic imaging of two-phase flow

Share article

Experimental study on aerosol behavior in water pool scrubbing under severe accident conditions

Share article

Study on the thermal and geometrical parameters of helical coil once-through steam generator system

Share article

Multi-objective optimal design of the nuclear reactor pressurizer

Share article

Stay Informed

Register your interest and receive email alerts tailored to your needs. Sign up below.