Exploration on the Application of Large Artificial Intelligence Models in the Field of Aeronautical Information Services
Available online 18 December 2025
Large artificial intelligence models have opened up new paths for transformation in the field of aeronautical information services. This paper explores their application potential in scenarios such...
Forecasting Air Transport Demand in Indonesia: A Machine Learning Approach Considering Socio-Economic Factors and Pandemic Impact
Available online 17 December 2025
Air transport plays a crucial role in Indonesia, the world's largest archipelago, facilitating economic development and vital connectivity amidst increasing demand. This study addresses the imperative...
Impact of aerospike geometry and jet cooling on aerothermal performance of high-speed blunted bodies
Available online 16 December 2025
Effective aerospike configuration is crucial for aerothermal performance around the blunted nose of high-speed vehicles. The presence of aerospike changes the flow field, affecting the drag and aerodynamic...
CFD and machine learning for scour prediction at square bridge piers: South Platte, Mississippi, Choptank, and Pearl rivers
Available online 6 November 2025
Local scour around bridge piers remains a leading cause of failure in hydraulic structures, especially for shapes like square piers that promote flow separation and turbulence. This study introduces...
Research on reliability assessment method of harbinger solenoid valves based on multi-physics field coupled degradation
Available online 17 October 2025
In response to the insufficient research on the multi-physics coupling degradation mechanisms of solenoid valves, a dual-factor coupled reliability model integrating spring stiffness degradation and...
Investigations of the working performance for small-scale cruciform parachute
June 2025
The growth of the low-altitude economy has led to an increase in the number of small aircraft and aviation equipment, thereby intensifying the demand for small-scale parachutes. Considering the limited...
Effect of the landing angles on the cushioning performance of multi-chamber airbags
June 2025
Presented in this paper is a numerical investigation into the cushioning performance of airbag employed for buffer protection. The cushioning performance, in terms of the peak overload, z-velocity and...
Next-generation civil aircraft flight recording system: Smart, deployable, and emergency-enabled
June 2025
Flight recording systems (FRS) are specialized electronic devices installed on aircraft to continuously record flight parameters, audio, video and data-link information throughout the flight. An FRS...
Multi-parameter influence on deceleration performance of ejector system for emergency flight data recorders
June 2025
In the event of an aircraft crash over the ocean, the potential risk of the Flight Data Recorder (FDR) system sinking to the ocean in conjunction with the aircraft debris is substantial, which would...
Beacon-based localization and emergency communication system: Design and implementation
June 2025
Rapidly locating and rescuing survivors and retrieving the black box after civil aircraft crashes on land or at sea is a critical requirement in modern aircraft design. To address the limitations of...
A GO-FTA-GERTS dual model for reliability assessment of aircraft ejection separation system
June 2025
The reliability assessment of aircraft ejection separation systems is crucial for aviation safety, but traditional methods exhibit significant shortcomings in dynamic behavior modeling, rare event quantification,...
Multi-objective optimization of lattice-based impact-resistant structure for flight recorder
June 2025
This paper focuses on the design of an impact-resistant protective structure for an ejection flight data recording and emergency tracking system. To ensure that the protective structure possesses excellent...
A plus system network model for reliability allocation in reconfigurable UAV systems with functional adaptability
June 2025
In the engineering domain, the execution of multiple tasks by complex systems holds critical significance for optimizing resource utilization efficiency and ensuring operational stability. However,...
Exploration of process parameters and post-processing of 3D printed SCF/PPS for low-altitude aircraft fabrication
March 2025
3D printing of short-chopped carbon fiber reinforced high-performance lightweight industrial components has a wide range of applications in aerospace.3D printing, as a rapid prototyping technology,...
A surrogate modeling method for large-scale flow field prediction based on locally optimal shape parameters
March 2025
To address the high computational cost caused by extensive matrix operations in constructing surrogate models for large-scale flow field prediction, this paper proposes an enhanced radial basis function...
Analysis of flow field and safety of skydiving from the aircraft
March 2025
To simulate the initial phase of a skydiver exiting an aircraft with rear-mounted turbofan engines, the unsteady fluid-structure interaction (FSI) method and turbulence model are used in conjunction...
Li-ion battery safety under aircraft simulated speed impact: Risk and mitigation
March 2025
Lithium-ion batteries (LIBs) play a critical role in the early adoption of small, electrified aircraft by providing the required energy, power, and cycle life. However, safety is still a concern, especially...
Autonomous finite-time disturbance observer-based control of the micro turbine: Speed/frequency regulation and dynamic power compensation
March 2025
This paper proposes an autonomous finite-time disturbance observer-based control (FTDOBC) scheme to simultaneously achieve speed/frequency regulation and dynamic power compensation. The proposed approach...
Blockchain-based UAV continuous authentication
December 2024
With the growing utilization of unmanned aerial vehicles (UAVs), low-altitude airspace is becoming increasingly congested, posing significant challenges to Air Traffic Control (ATC). The Automatic Dependent...
Exploration of processability limitations of fiber placement and thickness stacking optimization of thermoplastic composite hydrogen storage cylinders for hydrogen-powered aircraft
December 2024
Hydrogen-powered aircraft, as a cutting-edge exploration of clean-energy air transportation, impose more stringent requirements for lightweight hydrogen storage due to the limitations of aircraft weight...
Interference of 5G with aircraft radio altimeters: How to protect aviation safety in rapidly changing environment of expanding C-band networks
December 2024
The topic of 5G network development is resonating in the aviation world. According to the information from aircraft manufacturers, aircraft radio altimeters could be interfered with in the C-band frequency...
Reducing flight risks through wildlife control: John F. Kennedy International Airport example
December 2024
This study was developed to reduce wildlife-related flight risks in the case of John F. Kennedy Airport. Structures like as garbage collection and recycling facilities around the airport pose risks...
Anomaly detection in commercial aircraft landing at SSK II airport using clustering method
December 2024
This study focuses on the critical importance of compliant landing procedures for commercial aircraft to mitigate the risk of accidents, incidents, and financial losses. The research aims to raise awareness...
Thermal runaway prevention and mitigation for lithium-ion battery-powered electric aircraft: Challenges and perspectives
December 2024
Technologies for preventing and mitigating thermal runaway in electric aircraft are essential for ensuring passenger and flight safety, optimizing battery performance, and extending battery lifespan...
Scalable parallel evolutionary optimization on high performance computing
December 2024
To improve the efficiency of evolutionary algorithms (EAs) for solving complex problems with large populations, this paper proposes a scalable parallel evolution optimization (SPEO) framework with an...