Most Downloaded Articles

Open access

ISSN: 2949-7418
CN: 21-1620/O3
p-ISSN: 2097-5767

Artificial intelligence in tunnel construction: A comprehensive review of hotspots and frontier topics

Application of Artificial Intelligence (AI) in tunnel construction has the potential to transform the industry by improving efficiency, safety, and cost-effectiveness. This paper presents a comprehensive...

Roof bolting and underground roof falls

Roof bolting has been used in underground entry (roadway) support in U.S. coal mines since the Coal Mine Health and Safety Act of 1969 (US Congress, 1977) recognized roof bolting as the only means of...

Analysis of coal mine safety accident features in China, 2017–2022

Coal-related accidents are prevalent in China, often attributed to the intricate geology and challenging working conditions of mines. This study seeks to determine the patterns of these accidents by...

Application of the analytical hierarchy process (AHP) for flood susceptibility mapping using GIS techniques in lower reach of Keleghai River Basin, West Bengal, India

Flooding is one of the most devastating quasi-natural hazards in Southeast Asian monsoon region. The recent study aims to define the flood risk zones (FRZ) by using the multi criteria evaluation (MCE)...

Enhancing disaster management effectiveness: An integrated analysis of key factors and practical strategies through Structural Equation Modeling (SEM) and scopus data text mining

In the 21st century, the surge in natural and human-induced disasters necessitates robust disaster management frameworks. This research addresses a critical gap, exploring dynamics in the successful...

Geotechnical and geophysical studies for the cause of landslide in Lesalso, Laelay Maichew Wereda, northern Ethiopia

The northern highlands of Ethiopia often experience slope failures triggered by rainfall. Landslides are common in Lesalso, Laelay Maichew Wereda, northern Ethiopia, causing destruction to homes, crops,...

Near-field ground motion intensity parameters of the major February 06, 2023, Türkey Kahramanmaraş earthquake sequences

Türkey is located in a seismically active region where the Anatolia, Africa, and Arabia tectonic plates converge. The high seismic hazard causes the region to be repeatedly struck by major earthquakes....

Tunnel SAM adapter: Adapting segment anything model for tunnel water leakage inspection

Water leakage inspection in the tunnels is a critical engineering job that has attracted increasing concerns. Leakage area detection via manual inspection techniques is time-consuming and might produce...

Instability prevention and control of waste dump slopes with different consolidation degrees under the influence of rainfall

The stability and management of waste dump slopes are pivotal research topics in geotechnical engineering and have long posed central challenges in coal mine ecological restoration. Controlling the...

Leveraging remote sensing data with AHP and geospatial analysis for landslide susceptibility hotspot assessment in Bandarban of Bangladesh

In the 21st century, climate change has exacerbated global instability, leading to a rise in landslide occurrences. In Bangladesh, mountainous areas such as Bandarban experience significant landslides...

Complex analysis of GPR signals to control contact zone of concrete lining and rock mass

Nondestructive sensing technologies are essential for assessing the condition and structural integrity of concrete linings and their surrounding rock. This study utilized ground-penetrating radar (GPR...

An assessment of earthquake vulnerability by multi-criteria decision-making method

Earthquake is one of the most destructive catastrophes in Bangladesh and the evaluation of vulnerability is a prerequisite for the earthquake risk estimation. As a result, determining vulnerability...

Bayesian optimization-enhanced ensemble learning for the uniaxial compressive strength prediction of natural rock and its application

Engineering disasters, such as rockburst and collapse, are closely related to structural instability caused by insufficient bearing capacity of geological materials. Uniaxial compressive strength (UCS)...

Hardrock burst mechanisms and management strategies

Rockbursts occur as a direct consequence of underground mining or civil excavation. The general scale of their seismic disturbance and consequences depend upon known factors. However, uncertainty remains...

Ground collapse: effect of building position on tunnelling-induced soil movements

The mechanisms of tunnelling-induced ground movements are important for risk assessments of tunnelling beneath masonry buildings with shallow foundations, including ground collapse disasters. This paper...

A brief introduction to disaster rock mass mechanics

Rock mass mechanics can be classified into engineering rock mass mechanics and disaster rock mass mechanics based on science and application. Their conception, object, scientific essence and application...

Monitoring of surface subsidence disasters and evolution laws caused by multiple mining activities in coal mines based on SBAS-InSAR

In underground coal mining, surface subsidence disasters are likely to be induced. Especially, under the condition of multi-seam mining, the movement characteristics of the overlying strata are more...

Toward disaster management in rock engineering: Automated machine learning paradigm for predicting the uniaxial compressive strength of rock materials

The uniaxial compressive strength (UCS) of rocks is a crucial indicator for evaluating the bearing capacity of geological structures in rock engineering, and it holds significant implications for disaster...

Detection and targeted control of regional stress field for coal burst prevention

As coal burst normally occurs in the area of high stress concentration, it is of significance to study the features of regional stress field in coal mines. Primitive stress field, mining-induced stress...

Rockburst failure time prediction based on a fuzzy comprehensive evaluation method using the acoustic emission

Rockbursts have become one of the most serious disasters in underground engineering around the world, which seriously threaten the construction safety of underground engineering. The effective prediction...

Leveraging artificial neural networks for robust landslide susceptibility mapping: A geospatial modeling approach in the ecologically sensitive Nilgiri District, Tamil Nadu

Landslides pose a significant threat to the lives and livelihoods of marginalised communities residing in rural areas and the delicate ecological balance of the environment. Implementing advanced technologies...

Damage evolution and failure warning in early-age flexible-formwork concrete for underground support

The evolution law of mechanical properties and damage characteristics of early-age flexible formwork filling concrete have a decisive influence on the stability control of surrounding rock of large...

Assessment of seismic retrofitting interventions in reinforced concrete structures

Destruction of reinforced concrete (RC) structures, particularly non-ductile RC structures, in recent earthquakes demonstrate their vulnerability under lateral forces generated in an earthquake. Despite...

Evaluation of ground motion parameters and seismic response of reinforced concrete buildings from the Mw 6.9, 2011 Sikkim earthquake

The continuous collision of the Eurasian plate and the Indian plate has resulted in several earthquakes in the Himalayan region. The 6.9 Mw 2011 Sikkim earthquake, which caused immense damage to the...

Development laws of geological hazards along urban highway in Southwest China and countermeasures for prevention and control

China is a mountainous country with highly developed road geologic hazards, which pose a great threat to the construction and operation of highways, bridges, and tunnels and to the safety of people...

Stay Informed

Register your interest and receive email alerts tailored to your needs. Sign up below.