Review of common hydrogen storage tanks and current manufacturing methods for aluminium alloy tank liners
March 2024
With the growing concern about climate issues and the urgent need to reduce carbon emissions, hydrogen has attracted increasing attention as a clean and renewable vehicle energy source. However, the...
Electrical discharge machining: Recent advances and future trends in modeling, optimization, and sustainability
July 2025
Electrical Discharge Machining (EDM) has experienced significant advancements in modeling, optimization, and sustainability, reflecting the growing demand for intelligent and environmentally friendly...
Finite element analysis and experimental whiffletree testing of a small UAV composite wing
July 2025
This study presents a comprehensive investigation of the structural performance of a small unmanned aerial vehicle (UAV) composite wing, integrating finite element analysis (FEA) and experimental whiffletree...
Carbon-fiber reinforced polymer composites: A comparison of manufacturing methods on mechanical properties
December 2021
Carbon-fiber reinforced polymer composite materials are used throughout industry for their excellent mechanical properties; in particular, these composites boast high specific stiffnesses and specific...
The prospects of natural fiber composites: A brief review
July 2024
This research explores natural fiber composites (NFCs) as alternatives to traditional materials such as fiberglass. By examining fibers like abaca, bamboo, banana, coir, flax, hemp, jute, kenaf, pineapple...
Comparative study of the application of steels and aluminium in lightweight production of automotive parts
December 2018
The automotive industry has a decisive role in the economy of developed countries. Sheet metal forming – as one of the main processes in car manufacturing – has similarly important role. Concerning...
Exploring the integration of digital twin and additive manufacturing technologies
November 2024
This paper offers a comprehensive overview of recent advancements in digital twin technology applied to additive manufacturing (AM), focusing on recent research trends, methodologies, and the integration...
Machine learning in additive manufacturing: A comprehensive insight
March 2025
Additive manufacturing (AM) is a technological advancement gaining colossal popularity due to its advantages and simplified fabrication. AM facilitates the manufacturing of complex, light, and strong...
Optimization of fused deposition modeling parameters for improved PLA and ABS 3D printed structures
September 2020
3D printing is a popular technique for fabricating three-dimensional solid objects from a digital design. In order to produce high quality 3D printed parts, the appropriate selection of printing parameters...
Recent advancements in lightweight high entropy alloys – A comprehensive review
September 2024
Current advancements in technology enables the enhancement and refinement of alloys to address the demands of expanding industrial applications. High Entropy Alloys (HEAs) are a developing class of...
A review on forming techniques for manufacturing lightweight complex—shaped aluminium panel components
June 2018
Aluminium alloys are being increasingly utilised in the automotive and aerospace industries to reduce the weight of vehicles. Extensive research has been conducted to overcome the poor ductility of...
Investigating the impact of layer thickness and print orientation on strength and structural integrity of SLA 3D printed composites
March 2026
Additive manufacturing through stereolithography (SLA) offers promising capabilities for producing flexible photopolymer composites with tailored mechanical properties for advanced engineering applications....
Laser welding of Al6061 alloy with dynamic beam shape
March 2026
Modern laser systems can greatly enhance the technological capabilities of welding processes. This paper examines the laser welding of the Aluminum 6061 alloy using a 14 kW fiber laser equipped with...
“Advances in wire-arc additive manufacturing of nickel-based superalloys: Heat sources, DfAM principles, material evaluation, process parameters, defect management, corrosion evaluation and post-processing techniques”
November 2024
Wire arc additive manufacturing (WAAM) has increasingly been recognized as a cost-effective method for fabricating intricate metallic parts, especially from nickel-based superalloys. This review covers...
Additive manufacturing of magnesium alloys: Characterization and post-processing
January 2024
Magnesium and its alloys remain perilous in the framework of light weighting and advanced devices structure such as rockets and satellites. However, the utilization of Magnesium (Mg) is increasing every...
A data-informed review of scientific and technological developments and future trends in hot stamping
March 2024
As a promising solution to the growing demand for lightweighting, hot stamping has gained considerable applications in the automotive industry. Over the past few decades, the market for hot stamping...
Advances in fused deposition modelling process for printing the virgin and recycled carbon fiber-reinforced polymer composites: A state-of-the-art review
Available online 31 March 2026
Carbon fiber-reinforced polymer composites provide significant benefits compared to metals owing to their lightweight, corrosive nature, fatigue resistance, specific high strength, and modulus. Carbon...
Spark plasma sintering: A solid-state sustainable recycling technique
Available online 18 December 2025
This review comprehensively explores the emerging role of Spark Plasma Sintering (SPS) as a sustainable and versatile solid-state recycling technique across various industries. Emphasizing its advantages...
Durability and damage tolerance analysis methods for lightweight aircraft structures: Review and prospects
June 2022
This article started with a review on the evolutionary history of airworthiness regulations. Requirements for Durability and Damage Tolerance designs in current airworthiness regulations are an accumulation...
Hierarchical cubic lattice structures with bending- and stretching-dominated cellular designs for enhanced buckling resistance
May 2025
Buckling is a common failure mode in low-density strut lattices, limiting their mechanical strength and stability. This work presents a novel methodology to design and manufacture lightweight, buckling-resistant...
Investigation of the effect of materials and processing conditions in twin-screw extrusion
May 2024
Three polymeric materials; polystyrene (amorphous), low-density polyethylene (semi-crystalline), and poly(methyl methacrylate) (amorphous) were used to explore their behavior and properties during processing...
Experimental investigation of degradation in the marine environment of FDM-based 3D printed specimens
January 2026
Additive manufacturing technology, commonly known as 3D printing, is used to create three-dimensional objects. In 3D printing, Fused Deposition Modeling (FDM) is a solid-based additive manufacturing...
Deep learning-based applications in metal additive manufacturing processes: Challenges and opportunities–A review
July 2025
In metal additive manufacturing (AM), parts often exhibit quality variations, defects, intricate surface topography, and anisotropic properties influenced by factors such as process parameters, energy...
Challenges in additive manufacturing of high-strength aluminium alloys and current developments in hybrid additive manufacturing
June 2021
Additive Manufacturing (AM) processes, also known as 3D printing, enable geometrically complex parts to be produced layer by layer on the basis of three-dimensional (3D) data generated either by scanning...
Residual stress in metallic: Multi-scale formation mechanisms, performance influences, and active control strategies
Available online 26 December 2025
Residual stresses in metallic components, arising from uneven thermal, mechanical, and phase-transformation interactions during manufacturing (e.g., welding, additive manufacturing), critically influence...
