Fabrication of calcium carbonate coating on magnesium-neodymium alloy for mitigation of corrosion in simulated concrete pore solution
2024
Coating is frequently regarded as one of the most important ways to improve the corrosion behavior of magnesium alloys, and this study proposes a simple strategy for corrosion protection of Mg alloys...
Share article
Novel approach to the 3D printing of biphasic calcium phosphate/molybdenum disulfide composite reinforced with polyamide12
2024
In practical terms, the successful treatment of critical-sized bone defects remains a formidable obstacle. Among various options for bone regeneration, a customized 3D composite scaffold is widely acknowledged...
Share article
Optimized structure design of asymmetrical Mg alloy cerebrovascular stent with high flexibility
2024
In the treatment of cerebral artery stenosis via stent intervention, it is required that the stent can pass through the tortuous blood vessel with high curvature to reach the lesion position smoothly,...
Share article
Feasibility, challenges and future prospects of biodegradable zinc alloys as orthopedic internal fixation implants
2024
Compared to biodegradable Mg-based and Fe-based alloys, Zn-based alloys offer distinct advantages as orthopedic internal fixation implants due to their tunable mechanical strength, moderate corrosion...
Share article
Multiprocess additive manufacturing via fused deposition modeling, chemical deposition, and electroplating with tough interfacial adhesion
2024
Multiprocess additive manufacturing (MPAM) unlocks new materials and design spaces where multimaterial components consisting of polymers, metals, and ceramics can be produced as one consolidated part....
Share article
Corrosion resistance of in situ steam LDH coating on AZ31 and AM30 Alloys: Influence of NaOH and Al–Mn phase
2024
In situ formation mechanism of steam Mg–Al layered double hydroxide (Mg–Al–CO3-LDH) coatings on AZ31 and AM30 alloys was compared in presence of NaOH aqueous solution. The microstructure and elemental...
Share article
Advancements in polymer (Nano)composites for phase change material-based thermal storage: A focus on thermoplastic matrices and ceramic/carbon fillers
2024
This article explores (i) the potential of polymer (nano)composites as alternatives to conventional metals in the manufacture of heat exchangers and (ii) the application of Phase Change Materials (PCMs)...
Share article
Enhancing corrosion and wear resistance of Nickel–aluminum bronze through laser-cladded amorphous-crystalline composite coating
2024
In this study, laser-cladding technology was used to create Cu-based amorphous–crystalline composite coatings on the surface of Nickel-aluminum bronze (NAB), and the microstructure, mechanical properties,...
Share article
Thermally-activated locomotion of a bilayer polymer actuator
2024
The development of smart actuators based on renewable or biocompatible materials, which are able for delivery of specific cargo is of great importance in robotics, medical and material science engineering,...
Share article
Broadening the microstructure regime of Al2O3–ZrO2 hypereutectic ceramic fabricated via laser powder bed fusion
2024
The microstructure and mechanical property regime of laser powder bed fusion fabricated Al2O3–ZrO2 hypereutectic ceramic samples were thoroughly investigated by tailoring the printing parameters. The...
Share article
Influence of surface topographic morphologies and nanoparticle incorporation on surface properties of pure Ti implants for oral applications
2024
One common problem in using titanium (Ti) dental implants is peri-implantitis. To prevent peri-implantitis on Ti implants in an oral environment, we introduced novel topographic microstructures onto...
Share article
Peculiar microstructural evolution and hardness variation depending on laser powder bed fusion-manufacturing condition in Ti–6Al–2Sn–4Zr–6Mo
2024
This study aims to comprehensively analyze the phase and microstructure evolution and related hardness variations of the Ti–6Al–2Sn–4Zr–6Mo wt.% (Ti6246) alloy produced by laser powder bed fusion (LPBF)...
Share article
Anelastic deformation of magnesium and its alloys – A review
2024
The deformation of Mg is made up of elastic, anelastic and plastic components. Unlike the elasticity and plasticity which have been widely studied, the anelasticity has been routinely ignored in many...
Share article
Surface modification of additively manufactured metallic biomaterials with active antipathogenic properties
2023
Bacterial infection is one of the most common complications following the implantation of biomaterials and can lead to aseptic loosening, prosthesis failure, and even morbidity or mortality. Some physicochemical...
Share article
Inaugural editorial
2023
It is our privilege to start the first issue of our new Journal “Smart Materials in Manufacturing” (SMMF). Owing to their ability to transform and react over time due to a controlled response to an...
Share article
A compound Schiff base coating on biomedical magnesium alloy for enhanced corrosion resistance and biocompatibility
2023
The rapid degradation and delayed endothelialization of magnesium (Mg) alloys are the bottlenecks that limit their application in the direction of cardiovascular stents. In the previous work, we have...
Share article
Biodegradable metallic suture anchors: A review
2023
Suture anchors are widely used for attaching soft tissue to bone due to their ease of insertion, fixation strength, and small size. The past few decades have seen great advances in the materials and...
Share article
Biodegradable PLA-ZnO nanocomposite biomaterials with antibacterial properties, tissue engineering viability, and enhanced biocompatibility
2023
Polylactic acid (PLA) is a well-known biomaterial on account of its biocompatibility and biodegradability. Zinc oxide (ZnO) nanofillers may endow PLA with advantageous antibacterial and tissue regenerative...
Share article
Smart multifunctional elastomeric nanocomposite materials containing graphene nanoplatelets
2023
Pristine polyurea elastomers are usually limited by insufficient strength and lack of functionality. Smart, multifunctional and mechanically resilient nanocomposites were manufactured in this study...
Share article
Contributions of Ti-xTa cold spray composite interface to in-vitro cell growth
2023
Surface charge of biomaterials is one of the most influential parameters on regulating the complex processes of cell responses in tissue engineering. This study explores the contributions of xTa (x = 5;...
Share article
High entropy alloy coatings for biomedical applications: A review
2023
Metallic biomaterials are widely used as short and long-term implantable devices by virtue of their outstanding mechanical properties, such as high load-bearing capacity and fatigue resistance. Due...
Share article
Mechanical and corrosion properties of Mg–MgO and Mg–Al2O3 composites fabricated by equal channel angular extrusion method
2023
Equal channel angular extrusion (ECAE) has shown great potential for the consolidation of powdered materials. In the present article, the mechanical and corrosion properties of Mg–MgO and Mg–Al2O3 composites...
Share article
Various manufacturing methods and ideal properties of scaffolds for tissue engineering applications
2023
The precision in the design and manufacturing of scaffolds with ideal properties such as biocompatibility, biodegradability, mechanical and surface characteristics is very crucial for applications in...
Share article
Biodegradable Zn–Cu–Li alloys with ultrahigh strength, ductility, antibacterial ability, cytocompatibility, and suitable degradation rate for potential bone-implant applications
2023
Zinc (Zn) and its alloys have promising potential application in biodegradable bone implants, attributable to their moderate degradation rate and biological safety in the human body. Nevertheless, the...
Share article
Self-assembly meets additive manufacturing: Bridging the gap between nanoscale arrangement of matter and macroscale fabrication
2023
New methods are emerging to combine the self-assembly of matter and additive manufacturing, so that new devices and constructs can simultaneously harness the unique molecular and nanostructural features...
Share article